Home › Products › Wires
Products

Wires

Annealed wire

By standard EN ISO 16120-2 and in nominal diameters 1,30–18,00 mm.

Standard
EN ISO 16120-2
Nominal Dimensions
1,30–18,00 mm

Bead wire

Drawn wire of high carbon steel, normally of a diameter of 1.60 mm, metallized with a thin layer of copper or bronze.

Bright and Plating Quality Wire

According to EN ISO 16120-2 standard, in nominal diameter 1,30–14,00 mm.

Standard
EN ISO 16120-2
Nominal Dimensions
1.30 – 14.00 mm

Bright annealed wires

Bright annealed wires (low carbon wires)

Standard
EN 16120-2
Nominal Dimensions
0.125–3,15 mm

Cable Bead

The circular foot rope constructions (1 × 6.0) + 11 + 17 × 2.2 internal diameter 528 mm with coppered surface.

Cold heading wire

According to the EN 10263, DIN 1654 standards and in nominal diameters 1,6–36,0 mm.

Standard
EN 10263, DIN 1654
Nominal Dimensions
1.6–36.0 mm

Crimped brass coated brush wire

Undulating high carbon brass coated wires in diameters from 0.25 to 0.45 mm strength in the range 2000–3000 MPa in bundles of up to a length of 1600 mm.

Nominal Dimensions
0,25–0,45 mm
Nominal Tensile
2000–3000 MPa

Hard Drawn Steel Wire

By standard EN ISO 16120-2, in nominal diameters 1,30–18,00 mm.

Standard
EN ISO 16120-2
Nominal Dimensions
1.30–18.00 mm

Hard Drawn Steel Wire – Bars

By standard EN ISO 16120-2 and in nominal diameters 2,0–15,00 mm.

Standard
EN ISO 16120-2
Nominal Dimensions
2,0 – 15,0 mm

Hose wire

High carbon steel fine drawn wires, plated with a thin layer of brass (mass of brass 4–6 g/kg containing 64–70% Cu).

Needle wires

Needle wires (high carbon wire).

Standard
EN 16120-2
Nominal Dimensions
0.25–3.15 mm

Prestressed Steel Wire for Concrete

Prestressed Steel Wire for Concrete according to the PN 10138-2 standard (with parameters according to EN 10138-2), in nominal dimensions 4.00–8.00 mm and in nominal tensile from 1,570 to 1,770 MPa.

Standard
PN 10138-2 (EN 10138-2)
Nominal Dimensions
4.00 – 8.00 mm
Nominal Tensile
1,570 – 1,770 MPa

Profile wire

By standard EN ISO 16120-2.
Production range according to the attached specifications.

Standard
EN ISO 16120-2

Rope Wire – Bright and Galvanized

Rope wires in standardized nominal tensile strengths (following DIN 2078 and EN 10 264-2-3) and also in tensile strengths 2 260 MPa a higher (according to customer’s specification).

Standard
DIN 2078, EN 10 264-2,3
Nominal Dimensions
0.20 – 4.00 mm
Nominal Tensile
1180 – 2160 MPa

Semi-hard wires

Semi-hard wires (low carbon wires).

Standard
EN 16120-2
Nominal Dimensions
0,25–1,20 mm

Spring Wire – Bright and Galvanized

Spring wires in bare or galvanized finish, manufactured according to DIN 17223-1, EN 10 270-1 and in nominal diameters 0.30–12.00 mm.

Standard
DIN 17223-1, EN 10 270-1
Nominal Dimensions
0.30–12.00 mm

Spring Wire for Furnishing Production

Spring wires for the furnishing production in nominal strengths from 1,570 to 2,200 MPa and nominal diameters of 1.30–4.00 mm.

Standard
According to customer
Nominal Dimensions
1.30 – 4.00 mm
Nominal Tensile
1,570 – 2,200 MPa

Steel Wire for Electric Conductors

By standard DIN 48 200, St. III
in nominal diameters 2.00–4.20 mm
range of tensile strenghts 1310–1520 MPa

By standard DIN 48 200, St. IV
in nominal diameters 2.00–3.00 mm
range of tensile strenghts 1570–1810 MPa

By standard ČSN 42 6455
in nominal diameters 2.24–3.50 mm
range of tensile strenghts 540, 690, 980 a 1270 MPa

According to customers’ specification or according to ASTM B 498, IEC 888, EN 50189.

Standard
DIN 48 200, ČSN 42 6455
Nominal Dimensions
2.00–4.20 mm
Nominal Tensile
1310 – 1810 MPa